Our top-tier option, the Tru Flake 1-Day NanoX Polyaspartic Full Chip System, offers unmatched durability, aesthetics, and safety.

This 100% broadcast floor ensures complete coverage with color flakes, resulting in a thick, robust surface. With a fully transferable lifetime warranty, it is the ultimate choice for customers seeking the best quality and longevity in garage floor coatings.

Installation Steps Explained:

STEP ONE | Surface Preparation:

Remove all dirt, oil, and debris from the garage floor with a thorough cleaning, followed by mechanical grinding using specially designed diamonds to abrade the surface and eliminate coatings and other contaminants. Throughout the surface preparation process, a HEPA dust-free vacuum system circulates the air, ensuring a clean and safe work environment. After we do our crack repair, we will do this process again to really ensure the surface is prepaired for the next step.

STEP TWO | Application of Moisture Vapor Barrier (Optional):

Apply an MVB Primer Base Coat, using a 100% solid epoxy moisture vapor barrier if needed, depending on the substrate. This optional step enhances the system's overall performance and longevity.

Application of NanoX Polyaspartic Pigmented 85 Solids Base Coat

Apply a NanoX Polyaspartic base coat 10-12 MILS DFT5 in the customer’s desired color, ensuring an even and consistent application. This pigmented base coat provides a strong foundation, enhancing both the vibrancy and durability of the floor.

STEP THREE | Full Broadcast of Color Flakes:

Broadcast the chosen color flakes into the base coat resin for 100% coverage, ensuring a thick, robust surface. This step not only maximizes visual appeal but also enhances durability by providing complete flake coverage across the entire floor. Both of our Cove Base and Tru Non-Slip upgrade options are included with this system as well!

STEP FOUR | Application or our ALUMx HIGH WEAR ADDITIVE:

AlumX High Wear Additive is a finely ground aluminum oxide that, when added to coating systems like Poly85, significantly enhances durability, slip resistance, and longevity, making surfaces tougher, more resistant to wear and tear, and safer by providing better traction, especially in high-traffic or moisture-prone areas like garages and commercial floors.

STEP FIVE | Application of 100% Solids NanoX Polyaspartic Topcoat Gloss:

Apply a topcoat of 100% solids NanoX Polyaspartic of 10-12 MILS DFT, incorporating a reinforced polycarbonate non-slip additive for enhanced safety and durability. Ensure an even application throughout to achieve a seamless, protective finish that not only looks flawless but also provides long-lasting resilience.

STEP SIX | Curing Time,Quality Check and Final Inspection:

Allow the floor to cure for 6 hours before permitting item placement, 16 hours for foot traffic, and 24 hours before allowing vehicular traffic. This ensures that the coating has fully set and hardened, providing optimal durability and performance.

Conduct a thorough inspection of the finished floor to ensure it meets quality standards and adheres to specifications. Address any touch-ups or corrections as needed to ensure the final result is flawless and up to standard.

Potential Add-Ons

• Satin or Matte Finish Top Coat: Add a satin or matte finish for $0.75 per square foot. This option will extend the curing process by an additional 2 days.

• Custom Chip Color: Choose a custom chip color for $0.35 per square foot.

• Expansion Joint Filling: Fill expansion joints for $8.00 per linear foot.

• Moisture Vapor Primer: If needed, a moisture vapor primer is available for an additional $1.00 per square foot.