top of page

Your New Floor, Layer by Layer: A Guide to Tru-Grit’s Systems

3 days ago
5 min read

When you picture your new floor, you probably think about the finished space first. The color feels right. The surface looks consistent. An area you’ve wanted to improve finally looks the way you imagined. Choosing that appearance should be enjoyable. Understanding what you’re purchasing should feel just as straightforward.


As you compare floor coatings, you may hear about four, five or six layers. Those numbers describe different combinations of primers, decorative chips and clear coats. Knowing what each system includes helps you look beyond a finished-floor photograph and understand the installation being proposed.


Empty garage with speckled epoxy floor, wood cabinets, water heater and furnace on white walls, neatly lit and clean

Start with What Your Concrete Needs

Before you choose a color or coating package, take a closer look at the floor you already have. Is there an older coating that needs attention? Are there damaged areas or surface variations? What does the moisture evaluation tell us? How will you use the space once the work is complete?


Those questions help guide the recommendation. You should understand why a particular system fits your project, including what preparation is needed and which materials will be applied. Our surface preparation FAQ explains more about the foundation beneath a coating. The decorative finish comes later, after the requirements of your concrete have been considered.


What Does “Four, Five or Six Layers” Mean?

Each layer represents a step in the coating build. Some are resin applications, such as an epoxy primer or a clear polyaspartic coat. Others are decorative polymer chips spread into the coating. That chip application is called a broadcast.

Prepared concrete supports the system but does not count as a coating layer.

You’ll also see thickness expressed in mils, meaning thousandths of an inch. The thickness figures in this article describe the resin applications only. They exclude the decorative chips and should not be read as the total thickness of the finished floor.


When you compare proposals, ask about both the materials and their specified thicknesses. A layer count by itself does not tell you everything included.


The 4-Layer System: One Chip Broadcast and Two Clear Coats

The 4-layer system begins with a pigmented NanoX polyaspartic base coat. One broadcast of decorative polymer chips creates the pattern, and two clear coats complete the finish.


Infographic for Tru Grit Coatings showing a 4-layer industrial polymer chip flooring system with 24 mils resin and icons/text on layers.

From the prepared concrete upward, it includes:

  1. Tru Alpha NanoX Polyaspartic Pigmented Base Coat: 10 mils.

  2. Tru UV+ Polymer Chips: One broadcast, using 1/4-inch or 1/8-inch chips.

  3. Tru Alpha Nano X Polyaspartic Clear: 7 mils.

  4. Tru Alpha Nano X Polyaspartic Clear with Alum-X Anti Wear Additive and Fine Polycarbonate Anti Slip Additive: 7 mils.

The resin applications total 24 mils, excluding the chips. This system includes a 4-year adhesion and workmanship warranty.

There is no moisture-vapor-barrier primer, or MVB primer, in this build. More imperfections in the underlying surface may remain visible.

If you’re considering this option, ask us to explain how it fits the condition of your concrete. Understanding what the finished coating can show is part of setting clear expectations before work begins.



The 5-Layer System: An MVB Primer Beneath the Finish

The 5-layer system adds an MVB epoxy primer beneath the pigmented polyaspartic base. It retains one decorative chip broadcast and includes thicker clear coats than the 4-layer system.


Infographic of Tru Grit Coatings 5-layer epoxy floor system, showing layered blue-gray floor buildup and labels for each coat and 45 mils.

Its layers are:

  1. Tru Moisture Block MVB 100% Solids Epoxy Primer: 15 mils.

  2. Tru Alpha NanoX Polyaspartic Pigmented Base Coat: 10 mils.

  3. Tru UV+ Polymer Chips: One broadcast, using 1/4-inch or 1/8-inch chips.

  4. Tru Alpha Nano X Polyaspartic Clear: 10 mils.

  5. Tru Alpha Nano X Polyaspartic Clear with Alum-X Anti Wear Additive and Fine Polycarbonate Anti Slip Additive: 10 mils.

The resin applications total 45 mils, excluding the chips. This system includes a 7-year adhesion and workmanship warranty. The added primer and thicker clear coats change the build beneath and around the decorative chips. Subtle surface variations may still show.


An MVB primer does not replace an evaluation of your concrete. If this system is recommended, ask what the assessment found and why this particular combination of materials is appropriate for your project.



The 6-Layer System: Two Chip Broadcasts and a Thicker Build

The 6-layer system introduces a second decorative chip broadcast. It also uses a thicker MVB primer and includes a clear polyaspartic application between the two chip broadcasts.

Infographic of TRU Grit Coatings 6-layer industrial polymer chip flooring system with labeled layers, blue accents, and warranty.

This includes:

  1. Tru Moisture Block MVB 100% Solids Epoxy Primer: 24 mils.

  2. Tru UV+ Polymer Chips: First broadcast.

  3. Tru Alpha NanoX Polyaspartic Clear: 12 mils.

  4. Tru UV+ Polymer Chips: Second broadcast.

  5. Tru Alpha Nano X Polyaspartic Clear: 12 mils.

  6. Tru Alpha Nano X Polyaspartic Clear with Alum-X Anti Wear Additive and Fine Polycarbonate Anti Slip Additive: 12 mils.

Both 1/4-inch and 1/8-inch chips are available. The resin applications total 60 mils, excluding the chips, and the system includes a 10-year adhesion and workmanship warranty.


The double broadcast creates a fuller, more consistent chip bed. This system uses more material and adds another application step compared with the single-broadcast options.


For your project, the useful question is how that additional build serves the space. We can explain the differences alongside your surface conditions and intended use, so you can make your choice with a clear understanding of the recommendation.



Choosing the Look You’ll Enjoy

Once you understand the coating build, you can focus on the appearance. All three systems offer two chip sizes. Quarter-inch chips create a bolder pattern, while eighth-inch chips give a more subtle look. Your choice changes the visual presentation without changing the resin thickness specified for the system.

Garage floor coating comparison graphic with flake samples, inset garage photo, arrows, and text: 1/4 UV Polymer Flake and 1/8 UV Polymer Micro Flake

When reviewing colors, look at both close-up samples and wider project photographs. A small sample shows the individual tones. A larger view helps you picture how the pattern will feel across your space.



If layer diagrams accompany your proposal, remember that they are conceptual illustrations. They explain the order of the materials and are not drawings to scale or photographs of completed projects.


Understand the Finish and the Warranty

All three systems include anti-wear and anti-slip additives in the final coat. Those additives do not make a floor slip-proof. Discuss how you use the area, including whether it may become wet, so those conditions are part of the planning conversation.


The warranty durations in this guide apply specifically to the systems described:

  • 4-layer system: 4-year adhesion and workmanship warranty.

  • 5-layer system: 7-year adhesion and workmanship warranty.

  • 6-layer system: 10-year adhesion and workmanship warranty.


Ask for the full written coverage, conditions and exclusions before purchasing. These system-specific warranties should not be confused with coverage offered under a different Tru-Grit coating package.


Feel Informed Before You Decide

You don’t need to memorize every product name to choose your floor. You should, however, feel comfortable asking what will be installed, why it has been recommended and what you can expect from the finished surface.


At Tru-Grit, we’ll help you work through those details alongside the colors and patterns you like. Tell us what you want to improve, how you use the space and what concerns you have about the existing concrete. Explore Tru-Grit’s commercial and industrial coating systems to learn more and start a conversation about your project.



Comments

Rated 0 out of 5 stars.
No ratings yet

Add a rating
herring-503-floridaepoxygarage-epoxyinstallers-smallbusiness (4) (1)_edited.jpg

Stay In The Know

Subscribe to the Tru-Grit newsletter for helpful flooring tips, project insights, new articles, and updates delivered straight to your inbox. Get useful information to help you better understand your flooring options and make informed decisions for your next project.

Join Our Newsletter

Opening Hours:

Tru-Grit Garage Flooring LLC

Central Florida Luxury Polyaspartic Epoxy

Flooring For Residential and Business Solutions

Mon - Fri: 7AM - 4:30PM Eastern

  • Facebook Tru Grit Epoxy Flooring Central Florida
  • Instagram
  • Youtube
  • Pinterest
  • LinkedIn
  • Quora

Sat - Sun: Closed

White phone icon in a red circle
White location pin icon on a red circle background
White envelope icon in a red circle for email contact
Red and white clock icon representing time management.

By appointment only*

@2026 Tru Grit Garage Flooring. All Rights Reserved.

Home  |  Services  |  Gallery  |  Case Studies  |  Blog  |  Contact Us

bottom of page